Now that we know how to create a 3×3 linear matrix to convert white balanced and demosaiced raw data into connection space – and where to obtain the 3×3 linear matrix to then convert it to a standard output color space like sRGB – we can take a closer look at the matrices and apply them to a real world capture chosen for its wide range of chromaticities.
Tag Archives: lambertian
Color: Determining a Forward Matrix for Your Camera
We understand from the previous article that rendering color with Adobe DNG raw conversion essentially means mapping raw data in the form of triplets into a standard color space via a Profile Connection Space in a two step process
The first step white balances and demosaics the raw data, which at that stage we will refer to as , followed by converting it to Profile Connection Space through linear projection by an unknown ‘Forward Matrix’ (as DNG calls it) of the form
(1)
with data as column-vectors in a 3xN array. Determining the nine coefficients of this matrix is the main subject of this article[1]. Continue reading Color: Determining a Forward Matrix for Your Camera
Color: From Object to Eye
How do we translate captured image information into a stimulus that will produce the appropriate perception of color? It’s actually not that complicated[1].
Recall from the introductory article that a photon absorbed by a cone type (, or ) in the fovea produces the same stimulus to the brain regardless of its wavelength[2]. Take the example of the eye of an observer which focuses on the retina the image of a uniform object with a spectral photon distribution of 1000 photons/nm in the 400 to 720nm wavelength range and no photons outside of it.
Because the system is linear, cones in the foveola will weigh the incoming photons by their relative sensitivity (probability) functions and add the result up to produce a stimulus proportional to the area under the curves. For instance a cone may see about 321,000 photons arrive and produce a relative stimulus of about 94,700, the weighted area under the curve:
An Introduction to Color in Digital Cameras
This article will set the stage for a discussion on how pleasing color is produced during raw conversion. The easiest way to understand how a camera captures and processes ‘color’ is to start with an example of how the human visual system does it.
An Example: Green
Light from the sun strikes leaves on a tree. The foliage of the tree absorbs some of the light and reflects the rest diffusely towards the eye of a human observer. The eye focuses the image of the foliage onto the retina at its back. Near the center of the retina there is a small circular area called fovea centralis which is dense with light receptors of well defined spectral sensitivities called cones. Information from the cones is pre-processed by neurons and carried by nerve fibers via the optic nerve to the brain where, after some additional psychovisual processing, we recognize the color of the foliage as green[1].
Continue reading An Introduction to Color in Digital Cameras
Photons Emitted by Light Source
How many photons are emitted by a light source? To answer this question we need to evaluate the following simple formula at every wavelength in the spectral range of interest and add the values up:
(1)
The Power of Light emitted in is called Spectral Exitance, with the symbol when referred to units of energy. The energy of one photon at a given wavelength is
(2)
with the wavelength of light in meters and and Planck’s constant and the speed of light in the chosen medium respectively. Since Watts are joules per second the units of (1) are therefore . Writing it more formally:
(3)